Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Houston, TX
Gate access control in Houston means more than keypads and remotes. It means keeping the gate aligned and the operator dry on Beaumont clay that heaves posts out of plumb, and in a city where a single tropical storm can put an entire control board underwater overnight. If your driveway gate’s automation, sensors, or entry system is fighting Houston’s soil and weather, this is where you find the fix, the written price, and the photo record to prove what was done. Call (346) 375-5416 and a live person answers, day or night.
Why Houston Homes Are Different
Houston sits on Beaumont clay, a shrink-swell soil that expands when saturated and contracts hard during summer drought. That movement is constant under every gate post in the city, and it’s why a wrought-iron swing gate on a brick column in Tanglewood can bind on one side while the same gate in Piney Point tracks true. The post shifts a half inch, the hinge geometry changes, and the motor now works against the frame instead of with it.
Then there is water. Houston gets more than 50 inches of rain most years, humidity hangs near saturation, and Hurricanes Allison and Harvey are not history here. They are a recurring failure mode. In low-lying neighborhoods like Meyerland, a gate operator mounted at standard driveway height can sit fully submerged during a major rain event. The control board shorts, the motor floods, and the underground conduit carries water into connections that corrode for months afterward. Technicians in drier Texas cities never see this at the same scale.
Houston’s lack of municipal zoning also mixes heavy commercial slide gates next to small residential driveway gates, often on the same street. The right fix depends on the post material, the gate weight, the soil under it, and how high the water has been. We measure all four before we write a price.
Our Main Houston Services
These three services are the ones Houston homeowners call us about most often, and each has a dedicated Houston page with full detail.
Gate Repair in Houston
A sagging gate on clay soil is not just a hinge issue. It is usually a post that has moved, a frame that has racked, or a roller track that has filled with flood silt. We diagnose the whole assembly, not just the part that failed, and write the repair price before any tool comes out. See the full scope on our Gate Repair in Houston page.
Gate Installation in Houston
A new gate in Houston has to be engineered for what the soil and the storms will do to it, not just what looks right on the day it is hung. We size posts for clay movement on your specific lot, specify hardware that tolerates moisture, and set operator mounts high enough to survive the next flood. Details are on the Gate Installation in Houston page.
Gate Motor & Opener in Houston
When an operator fails after a storm, the root cause is usually water in the board, a drowned motor, or a limit switch that corroded in place. We open the unit, document what we find, replace only what failed, and photograph the new settings before we leave. Read more on the Gate Motor & Opener in Houston page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Houston
Gate access control in Houston is about one thing: making sure the gate opens when you want it to, and does not open when you don’t. The clay movement and flood cycles here are unusually hard on access hardware. A keypad that worked fine in October can be knocked out by a post shift in June or a control board that took on water during a spring downpour. This is the work described in our Gate Access Control service, and it is the service Houston calls us for most when a gate will not respond to a code, a remote, or a phone call.
Keypad Entry
Signs you need it
The keypad beeps but the gate does not move, or it works only when pressed twice, or it stops responding after rain.
What it costs in Houston
A keypad entry repair in Houston typically runs $125 to $400, and a full keypad replacement lands between $350 and $800.
How we do it
We test the keypad circuit, check the wiring run to the operator for moisture intrusion, reset or replace the unit, and photograph the new code settings.
Video Intercom
Signs you need it
The video feed stays black, audio is one-way, or the indoor monitor does not wake when the outdoor station is pressed.
What it costs in Houston
Video intercom repair in Houston usually runs $150 to $450; a full replacement starts around $600 and can reach $1,800.
How we do it
We trace the signal from the outdoor station to the monitor, identify the failed component, replace it with a compatible part, and leave a documented photo log of the installation.
What Gate Access Control Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Keypad repair | $125 - $400 |
| Keypad replacement | $350 - $800 |
| Video intercom repair | $150 - $450 |
Can you fix a keypad the same day in Houston?
Yes. Keypad and remote-control failures are repair work, and we dispatch same-day across most of Houston. The written price is handed to you before any wires are touched.
Do you replace access control boards that got wet?
Yes, and this is common in Meyerland and other low-lying Houston neighborhoods. We open the operator, photograph the board, test the circuits, and replace only what failed. Call (346) 375-5416 for the exact written quote.
Gate Parts & Welding in Houston
Gate parts and welding in Houston come down to metal against moisture. The humidity and flood cycles here age iron and steel fast, so a hinge that looked sound last season may be rusting from the inside now. This is the work covered in our Gate Parts & Welding service, and it is what Houston calls us for when a gate has to come apart to be made right.
Hinge Replacement
Signs you need it
The gate drops toward the latch side, scrapes the ground, or shows rust weeping from the hinge barrel.
What it costs in Houston
Hinge replacement in Houston typically runs $85 to $250 per hinge, depending on the gate weight and whether the post needs reinforcement first.
How we do it
We support the gate, cut or unbolt the old hinge, weld or bolt the new one in place, and photograph the final alignment.
Custom Welding
Signs you need it
A crack runs through a picket, the frame has separated at a corner, or the track is broken through where it was welded to the post.
What it costs in Houston
Custom welding in Houston generally runs $150 to $600 per repair, depending on the length of the crack and the thickness of the material.
How we do it
We grind the joint clean, weld it with the correct rod for the metal, and document the repair with before-and-after photos.
What Gate Parts & Welding Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Hinge replacement | $85 - $250 per hinge |
| Custom welding | $150 - $600 per repair |
| Post replacement | $400 - $1,200 per post |
Can you weld a gate that is still in place?
Usually, yes. We can weld most cracks without removing the gate from its hinges. For a broken post, we excavate, set the new post in concrete, and leave a photo record of the whole job.
Do you match the existing finish after welding?
We grind the weld smooth and coat it to match the surrounding finish as closely as the metal allows. On older Houston gates, a perfect match is not always possible, and we will say so before the price is written. Call (346) 375-5416 for the exact quote.
Brands We Service in Houston
We service BFT, Linear, Viking, and Ghost Controls operators, among others, and stock common control boards, remotes, and limit switches in our Houston office. Most part replacements are completed the same week because the part is already in the city. See the full list on our brands page.
Pricing for Gate Repair in Houston, TX
| Service | Typical range in Houston |
|---|---|
| Keypad repair | $125 - $400 |
| Keypad replacement | $350 - $800 |
| Video intercom repair | $150 - $450 |
| Hinge replacement | $85 - $250 per hinge |
| Custom welding | $150 - $600 per repair |
| Post replacement | $400 - $1,200 per post |
| Gate rollers | $90 - $200 per roller |
| Rail repair | $250 - $700 |
Prices move up in Houston when flood water has been inside the operator, when the post has shifted on clay and needs to be reset before the mechanical work can start, or when the gate is unusually heavy. Whatever the figure, it is written down and agreed to before any work begins. That is Haven Standard Clause 1, and it is not negotiable.
Neighborhoods We Serve in Houston
We work across Houston, from the west-side corridor to newer subdivisions north, south, and east. Here are a few of the areas we see most often:
- River Oaks
- Tanglewood
- Memorial
- Meyerland
- Piney Point
Response time for repair calls is usually same-day or next-day across these areas. Flood-season repair demand can push scheduling out, but the phone always gets a live person who can tell you exactly when we will be there.
Service Area - Cities Near Houston
We also serve communities just outside the Houston core, including Pasadena, TX, Channelview, TX, Bellaire, TX, and Humble, TX. The same written-price standard and documented record apply on every job, in every one of these cities.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Houston
Most repair calls are reached the same day, and emergency calls are answered around the clock by a live person. For installation or access-control projects, we schedule a free measure and give you a written price before any work begins.
Many west-side Houston neighborhoods are deed-restricted with an HOA, and some require written approval before a gate’s appearance changes. A like-for-like repair rarely needs it, but a new gate or a visible replacement often does. We can tell you which path your job falls under when we write the quote.
Yes, and we see it constantly in Meyerland, the Memorial Villages, and other low-lying Houston areas. The operator, board, and wiring are assessed, we photograph what we found, and we replace only the parts that failed. Call (346) 375-5416 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Houston Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.