Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pearland, TX
Gate access control failures in Pearland usually trace back to two things: flood-damaged electronics from Hurricane Harvey, or black-clay soil movement that has slowly pulled buried wiring apart. We see both constantly across Shadow Creek Ranch, Silverlake, and the older gated subdivisions where operators were installed in bulk during the 2000s buildout. A dead keypad or a gate that opens by itself is rarely just a remote problem here. Call (346) 375-5416 and a live person answers, day or night.
Why Pearland Homes Are Different
Most Pearland gates sit on the same expansive black-clay belt as greater Houston. The soil swells when wet and shrinks when dry, which means gate posts heave and rack seasonally. A swing gate that cleared fine in March can drag by August, not because the hinges failed, but because the ground shifted under the post. That failure mode changes the repair: we stabilize the post base or the problem returns within a year.
The housing stock compounds it. Pearland’s master-planned communities, Shadow Creek Ranch and Silverlake especially, went up fast in the 1990s and 2000s. Entire subdivisions share the same gate model, installed on the same compressed timeline, so whole streets now hit the same failure schedule together. HOA covenants in those neighborhoods also constrain what can be replaced and how it must look, so a gate motor swap sometimes needs board approval before the first tool comes out.
Then there’s Harvey. August 2017 put much of Pearland under water, and a lot of gate operators took on water that was never disclosed. We open enclosures regularly and find visible flood-tide waterlines across the circuit board. The housing looks fine on the outside. The board is a corrosion time bomb on the inside.
Our Main Pearland Services
Pearland homeowners call us most often for three things: gates that won’t move, gates they want replaced, and motors that stopped responding. Each job gets a written price before work starts, and a photo record when we leave.
Gate Repair in Pearland
A Pearland gate repair usually starts with us finding what actually failed, not guessing. Misaligned photo-eyes, worn hinges, and Harvey-damaged control boards account for most of the calls we run here. Black-clay soil movement makes post racking a recurring problem that simple part swaps won’t fix. We document every adjustment and replacement with photos so the next technician doesn’t have to rediscover anything. Full details on Gate Repair in Pearland.
Gate Installation in Pearland
New gate installations in Pearland have to clear two bars: the soil and the HOA. We quote the post stabilization explicitly because expansive clay will move a poorly set post within a season. We also photograph the finish and style before ordering, since Shadow Creek Ranch and similar communities have covenants that limit what can go in. The written scope includes every line item before any concrete is poured. See Gate Installation in Pearland for specifics.
Gate Motor & Opener in Pearland
Pearland’s humidity and flood history make gate motor work more involved than a simple swap. Corroded low-voltage connections inside the operator housing are common, and many motors that look intact have boards with Harvey waterlines. We service whatever brand is already on the property rather than steering toward replacement. Full scope and pricing on Gate Motor & Opener in Pearland.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Pearland
Gate access control in Pearland is about restoring a system that has been quietly degrading since the last flood or the last wet-dry soil cycle. The housing era matters: thousands of automated gates went in during the 2000s buildout, many with buried low-voltage runs that are now failing from corrosion and ground movement. The failure presents as a keypad that works intermittently, a card reader that stopped reading, or a ghost-opening at 2 a.m. On this page you’ll find what those jobs cost and how we approach them, and the full scope of our Gate Access Control work.
Keypad Entry
Signs you need it
The keypad works only when it’s dry, or it works for three days after a rain and then dies.
What it costs in Pearland
Keypad replacement in Pearland typically runs $180 to $340 for the part, depending on whether the buried wire run is still intact.
How we do it
We test the wire run first, then replace or reprogram the keypad, and photograph the final wiring and the new code state.
Phone Entry
Signs you need it
Calls ring through but the gate doesn’t open, or the system dials a dead number and you can’t change it.
What it costs in Pearland
Phone entry repair in Pearland runs $150 to $300 for reprogramming and relay checks, more if a new cellular unit is required.
How we do it
We open the operator, verify the relay triggers on command, reprogram the dialer, and test the full cycle before leaving.
What Gate Access Control Costs in Pearland
| Item | Typical range in Pearland |
|---|---|
| Keypad entry replacement | $180 - $340 |
| Phone entry reprogramming | $150 - $300 |
| Card reader integration | $250 - $600 |
Will a Harvey-damaged control board keep failing after a keypad swap?
Yes. If the board has flood corrosion, a new keypad won’t fix the underlying problem. The board will keep failing until it’s cleaned or replaced. Call (346) 375-5416 and we’ll open the enclosure and show you the waterline.
Can you add a phone entry system to my existing Pearland gate?
In most cases, yes. The existing operator’s relay is usually compatible, and we wire the new phone unit into it. We’ll quote the full price in writing before starting.
Gate Parts & Welding in Pearland
Gate parts and welding in Pearland is mostly about corrosion and soil movement. Iron gates rust through faster here than almost anywhere else in Texas, and expanding clay racks the frame until hinges tear and welds crack. A gate that still looks fine from the street is often structurally compromised at the bottom hinge. Our Gate Parts & Welding work includes hinge replacement, post stabilization, rail repair, and custom welding matched to the existing finish.
Hinge Replacement
Signs you need it
The gate sags visibly, drags on the drive, or the hinge pin has worn through and the leaf separates from the post.
What it costs in Pearland
Hinge replacement in Pearland typically runs $150 to $400 per hinge depending on gate weight and whether the post must be re-shimmed.
How we do it
We take the gate load off, cut out the old hinge, weld in the new one, and photograph the penetration and the final alignment.
Post Replacement
Signs you need it
The post leans, the gate no longer clears the latch, or the base shows a crack running down from the weld.
What it costs in Pearland
Post replacement in Pearland runs $350 to $800 depending on depth, concrete conditions, and whether the black clay needs a deeper set or gravel base.
How we do it
We dig out the old post, set the new one below the active clay zone, pour and backfill, and re-hang the gate level.
What Gate Parts & Welding Costs in Pearland
| Item | Typical range in Pearland |
|---|---|
| Hinge replacement | $150 - $400 per hinge |
| Post replacement | $350 - $800 |
| Custom welding repair | $120 - $350 per section |
Can you match the existing gate finish after welding?
Yes. We match the repair to the existing paint or powder coat, and we photograph the repair before and after finish. Pearland humidity makes rust protection on the weld critical.
Why did my gate post move again after a previous repair?
In Pearland, the post wasn’t set below the active clay movement zone. A shallow set post will re-rack within a season or two. Call (346) 375-5416 and we’ll quote a proper stabilization.
Brands We Service in Pearland
We work on Linear, Viking, Ghost Controls, and DoorKing operators, among others. We stock common control boards, photo-eyes, and remotes for these brands locally, which keeps many Pearland repairs to a single visit. See our brands for the full list. If the motor on your gate is one we service, we repair it rather than pushing a replacement.
Pricing for Gate Repair in Pearland, TX
| Service | Typical range in Pearland |
|---|---|
| Service call / diagnosis | $75 - $125 |
| Hinge replacement | $150 - $400 per hinge |
| Post replacement | $350 - $800 |
| Keypad entry replacement | $180 - $340 |
| Phone entry reprogramming | $150 - $300 |
| Card reader integration | $250 - $600 |
| Gate motor replacement | $450 - $950 |
| Custom welding repair | $120 - $350 per section |
| Gate installation (full) | $1,800 - $6,500 |
Prices in Pearland push higher when the post base needs excavation into the clay, when HOA approval adds a delay, or when a Harvey-damaged board is found behind a “simple” motor call. Every price is written and handed over before work starts. Nothing gets added at the end.
Neighborhoods We Serve in Pearland
We serve the entire Pearland area, including the following neighborhoods. Response time across the city is typically same-day for repair calls, and emergency access issues are dispatched as they come in.
- Shadow Creek Ranch
- Silverlake
- Silvercreek
- Southwyck
- Lakes of Highland Glen
Service Area - Cities Near Pearland
We also provide gate service in the surrounding area. If you’re in Friendswood, TX, Pasadena, TX, Deer Park, TX, or Bellaire, TX, give us a call. Dispatch is coordinated from the Houston office, and crews serve Pearland locally.
Serving Pearland, TX - Our Local Coverage Area
We’re based in the Pearland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pearland
Same-day in almost all cases. A live person answers (346) 375-5416 at any hour, and we dispatch a Pearland-area technician with a written price before work begins.
Often yes, especially in Shadow Creek Ranch and Silverlake, where covenants govern gate style and finish. We can help document the repair scope for the board. We never start work without the approval you tell us is required.
Always. You get a written price for the full scope, including parts and labor, before any tool is picked up. No surprise invoice at the end, under any circumstances.
Call (346) 375-5416 for a free estimate on gate repair, access control, parts, or welding in Pearland. Written price before work starts. Photo record when we leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pearland Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.