Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Aldine, TX
Gate access control in Aldine means solving for two very different properties on the same service route: the 1960s ranch home with a tubular steel driveway gate on a quiet residential street, and the industrial truck yard off Aldine-Westfield that cycles a heavy slide gate a hundred times a shift. The clay soil, the Greens Bayou floodplain, and the age of the housing stock all shape which parts fail first. Call (346) 375-5416 when a gate stops answering, and we’ll name the problem and the price before any work starts.
Why Aldine Homes Are Different
Aldine sits in a low-lying pocket of north Harris County where Greens Bayou and Little Cypress Creek run close. The soil here is Houston black clay, the kind that swells after a wet week and shrinks into cracks after a dry one. Every swing gate on a residential lot is anchored in that soil. When posts shift, the gate sags at the latch, the operator strains against a strike plate that no longer lines up, and the motor burns through its limit cycle trying to close a gap that will not close. We see that pattern constantly in the ranch-style subdivisions built from the 1960s through the 1980s, where most gates are tubular steel or chain-link, not ornamental iron.
Then there is the water. Aldine was among the hardest-hit communities in north Harris County during Harvey, and any ground-level operator in a flood-prone lot carries that history in its control board. Water recedes and the board still shorts two weeks later. That is the call we bring spare boards and new motor seals for, because by the time a homeowner calls us, the damage is already done and the gate will not move.
Our Main Aldine Services
Most calls in Aldine fall into three buckets: a gate that will not open, a gate that needs to be built or replaced, and a motor or opener that no longer responds. Here is what each looks like on the ground.
Gate Repair in Aldine
Repair work in Aldine usually starts at the hinges and the track. On ranch homes and manufactured lots, the steel tube frames outlast the hardware, so we replace hinge pins, weld cracked stress points at the post base, and realign slide rails that the clay has pulled out of level. On the industrial side, rollers and V-groove wheels wear fast under truck-frequency cycling. Gate Repair in Aldine covers the full range, with a written price before the first tool comes out.
Gate Installation in Aldine
New gates in Aldine need footings dug for the soil, not just the gate size. The clay heave means posts need to be set deeper and anchored in concrete that accounts for wet-dry cycles, or the new gate is leaning inside a year. We also account for drainage on floodplain lots so a ground-level operator is mounted above the historical water line where the terrain allows. Gate Installation in Aldine walks through what a full job includes, from post setting to final limit adjustment.
Gate Motor & Opener in Aldine
Motors in Aldine fail two ways: electrical, from water intrusion or aged boards, and mechanical, from a misaligned gate overloading the drive train for months before the owner notices. We service nine brands, so we can work on whatever motor is already mounted rather than steering you toward a replacement. Gate Motor & Opener in Aldine covers diagnosis, board replacement, and full operator swaps with a documented record on every visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Aldine
Gate access control in Aldine means keypads, remotes, phone entry, card readers, and video intercoms on gates that range from a single-family ranch driveway to a commercial lot with twenty trucks cycling in and out all day. The recurring problem here is water and heat: keypads mounted in direct sun on a west-facing post fail earlier, and boards inside ground-level enclosures corrode after floodplain inundation even when the gate itself still rolls. We carry replacement boards, keypads, and receivers for most major brands and can usually bring a dead entry system back the same visit. For a full picture of the systems we work on, see Gate Access Control.
Keypad Entry
Signs you need it
Your keypad flashes but won’t open the gate, certain codes stopped working, or the housing has gone brittle and fogged from sun and moisture.
What it costs in Aldine
Keypad replacement in Aldine typically runs $180 to $400 depending on whether we can reuse the existing wiring and mounting plate.
How we do it
We test the existing wiring, confirm the keypad is sending signal, then swap the unit or repair the wire run, then photograph the new code setting before we leave.
Phone Entry
Signs you need it
The call box dials but no one can hear the visitor, or the gate never triggers when a tenant presses the entry code on their phone.
What it costs in Aldine
Phone entry repair in Aldine runs $200 to $500 depending on whether we’re replacing a cellular relay or rewiring a landline unit.
How we do it
We trace the incoming line, test the relay that trips the gate, and replace or reprogram the unit, then leave a written record of every setting changed.
What Gate Access Control Costs in Aldine
| Item | Typical range in Aldine |
|---|---|
| Keypad replacement | $180 - $400 |
| Phone entry repair | $200 - $500 |
| Receiver or remote programming | $90 - $180 |
Can you add a keypad to an existing Aldine gate system?
Yes. Most operators from Linear, Viking, Ghost Controls, and DoorKing have open input terminals for a wired keypad, and we can add one in a single visit. The written quote covers the keypad, wire run, and programming.
Will a phone entry system survive an Aldine flood event?
Maybe not if the enclosure sits at grade. We install phone entry units with sealed enclosures and raised mount heights where the lot allows, and we recommend relocating ground-level control boards above the historical water line. Call (346) 375-5416 for an honest read on your specific setup.
Gate Parts & Welding in Aldine
Gate parts and welding in Aldine comes down to two jobs: mechanical hardware that gave out and steel that cracked at the stress point. On residential lots, the culprits are hinge pins that wore oval, post bases that rusted where the concrete meets the steel, and slide gates that dragged on rails the clay moved out of level. On commercial yards, rollers and V-groove wheels wear fast and the weld joints at the drive rack take the abuse. See Gate Parts & Welding for the full scope.
Hinge Replacement
Signs you need it
The gate drags on the latch side, swings too easily in one direction, or the hinge pin has visible wear rings and play.
What it costs in Aldine
Hinge replacement in Aldine runs $150 to $350 per hinge depending on gate weight and whether the post face is still sound.
How we do it
We jack the gate to unload the hinge, cut or unbolt the old hardware, weld or bolt the new hinge in place, and set the swing so the gate latches square.
Rail Repair
Signs you need it
The slide gate shudders as it moves, the V-wheels ride up at one spot, or the rail has a visible flat or sag from soil movement.
What it costs in Aldine
Rail repair in Aldine runs $250 to $600 depending on whether we can re-anchor and shim the existing rail or need to replace a section.
How we do it
We check the rail for level in three places, re-anchor or shim the low spots, and reset the gate wheels so the gate travels without binding.
What Gate Parts & Welding Costs in Aldine
| Item | Typical range in Aldine |
|---|---|
| Hinge replacement (per hinge) | $150 - $350 |
| Rail repair | $250 - $600 |
| Custom weld repair at stress point | $120 - $300 |
Can you weld a cracked gate post in place without removing the gate?
Usually yes. We can reinforce a cracked post at the base with a welded gusset or sleeve while the gate is jacked and supported, which avoids a full post excavation. The repair is photographed and documented before we leave.
Do you stock gate parts locally for Aldine jobs?
We carry common hinge pins, rollers, V-wheels, and weld plate on our trucks, and our Houston office stocks boards and receiver parts for same-week dispatch. Call (346) 375-5416 if you need a specific part identified.
Brands We Service in Aldine
We work on whatever motor is already on the property, including Linear, Viking, Ghost Controls, and DoorKing. We keep common boards, remotes, and receiver parts stocked locally so most Aldine repairs happen in a single visit. See our brands for the full compatibility list.
Pricing for Gate Repair in Aldine, TX
| Service | Typical range in Aldine |
|---|---|
| Hinge replacement (per hinge) | $150 - $350 |
| Rail repair | $250 - $600 |
| Custom weld repair | $120 - $300 |
| Keypad replacement | $180 - $400 |
| Phone entry repair | $200 - $500 |
| Receiver or remote programming | $90 - $180 |
| Gate motor replacement | $600 - $1,400 |
| Control board replacement | $200 - $500 |
| Full gate installation | $1,800 - $6,000 |
What pushes a price up in Aldine is site condition: a flood-damaged board inside a corroded enclosure costs more in labor than a clean swap, and a post set in heaved clay often needs re-anchoring before the new hardware goes on. Whatever the number, you get it in writing before the work begins, and that written number is what you pay.
Neighborhoods We Serve in Aldine
We run calls across Aldine from the residential streets near Aldine High School to the industrial yards along Aldine-Westfield and the Hardy Toll corridor. Typical response time for a repair call in the area is same day or next morning, and emergency calls are dispatched as they come in.
- Greenspoint area
- Hidden Valley
- Westfield
- East Aldine
- Hardy Toll corridor
Service Area - Cities Near Aldine
Our crews cover Aldine and the surrounding north Harris metro from the same dispatch office. We regularly send technicians to West University Place, TX, Bellaire, TX, Houston, TX, and Stafford, TX.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aldine
Same day in most of Aldine, and we dispatch emergency calls as they come in without a voicemail queue. A live person answers the phone 24/7 and schedules the next available truck in your area. Call (346) 375-5416.
Repair work on an existing gate typically does not require a permit in unincorporated Aldine, but new gate installation with concrete footings may. We handle the permit scope discussion during the written quote so there are no surprises on the day of the job.
Yes. We service electric slide gates, cantilever gates, and access control on trucking yards and warehouse properties throughout Aldine, including along the Hardy Toll corridor. Commercial jobs get the same written price and photo documentation as residential calls.
Call (346) 375-5416 for a free estimate on any gate repair, access control, or welding job in Aldine. A live person answers, the price is in writing before work starts, and the photo record goes home with you.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aldine Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A.