Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Jacinto City, TX
Gate access control and the metalwork that supports it are the two calls we run most in Jacinto City. The housing here, mostly post-WWII bungalows from the 1940s through the 1960s, came with narrow driveways and a strong preference for ornamental iron. Decades of Ship Channel air, salt humidity, and standing water after heavy rain turn those gates into a maintenance item. Call (346) 375-5416 when a keypad stops reading or a hinge barrel rusts through, and we’ll put the price in writing before any work starts.
Why Jacinto City Homes Are Different
Jacinto City sits at near-zero elevation inside the Harris County floodplain, a few blocks from the Houston Ship Channel industrial corridor. That position produces two things we see on nearly every service call: accelerated rust and recurring water intrusion. The petrochemical haze and salt-laden humidity off the channel corrode ornamental iron faster than almost anywhere else in Harris County. Hinge barrels, latch boxes, and weld points can show through-rust within 18 to 24 months without a proper coating. That is not a hypothetical here; it is the normal life cycle of exposed ferrous metal.
Water is the second problem. Yard drains back up, streets hold water, and gate operator housings mounted low on the post take on floodwater during heavy rain events. After Hurricane Harvey in 2017, we opened control boards that were still wet three days later. The housing stock is dense and aging, with a strong Hispanic cultural presence that favors decorative wrought iron even on small lots. That gives us a steady workload of ornamental iron repair, but it also means the customer usually has an emotional attachment to the gate, so we repair and rebuild rather than pushing replacement unless the metal is structurally gone.
Our Main Jacinto City Services
Most Jacinto City homeowners reach out for one of three things: a gate that no longer opens, a gate that needs to be built from scratch, or a motor that has failed from corrosion or floodwater. Here is how each one works here.
Gate Repair in Jacinto City
A repair call in Jacinto City usually starts with rust, not an accident. Hinge barrels seize, latch tongues snap, and bottom rails rot through from standing water after heavy rain. We cut out the failed section, weld in new material, treat the surrounding metal, and coat the repair. Hardware is swapped, not patched. If the gate is worth saving, we save it and photograph everything. See the full scope at Gate Repair in Jacinto City.
Gate Installation in Jacinto City
Lots here are narrow and slab-built, which means post depth and conduit placement have to be worked out carefully before any digging starts. We measure the driveway, mark underground utilities, and order steel cut to the opening. Powder coat or marine-grade hardware is a standard recommendation this close to the Ship Channel; it is not an upsell, it is the only coating that lasts. Details at Gate Installation in Jacinto City.
Gate Motor & Opener in Jacinto City
Jacinto City openers fail two ways: floodwater fills the housing and fries the board, or corrosion works through the limit switches and the gate over-travels. We diagnose the motor on site, carry parts for nine major brands, and reset limits with a photo of the final position. Any repair comes with the 365-Day Done Right Promise. The full process is at Gate Motor & Opener in Jacinto City.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Jacinto City
Access control in Jacinto City tends to fail because of moisture and power quality, not because the hardware was cheap. Homes from the 1940s and 1950s often have ungrounded outdoor circuits, and the same floodwater that gets into gate motors also wicks up into keypad enclosures and card reader wiring. We work on the control side as a documented system, not a single part, which is what our Gate Access Control service is built on. Every repair leaves a written record of what was set, what was replaced, and what the wiring looked like when we left.
Keypad Entry
Signs you need it
The keypad accepts codes intermittently, shows dead keys, or shorts out after rain and resets itself.
What it costs in Jacinto City
Keypad replacement or installation in Jacinto City typically runs $180 to $340, depending on the brand and whether the backplate is corroded through.
How we do it
We pull the old unit, inspect the wiring for water damage, splice in a fresh weather-sealed whip, mount the new keypad, and photograph the final configuration.
Remote Control
Signs you need it
The remote works only from a few feet away, or the gate responds to some remotes but not others.
What it costs in Jacinto City
Remote programming or replacement in Jacinto City typically runs $110 to $220, including the new transmitter if the existing one is dead.
How we do it
We verify the receiver frequency, clear corrupted codes from memory, program the new transmitter, and test it from the street at the normal entry distance.
What Gate Access Control Costs in Jacinto City
| Item | Typical range in Jacinto City |
|---|---|
| Keypad replacement or installation | $180 - $340 |
| Remote programming or replacement | $110 - $220 |
| Replacement control board (flood-damaged) | $260 - $480 |
Can you replace a flood-damaged keypad the same week in Jacinto City?
Yes. We stock weather-sealed keypads from the brands most common in the area and can usually replace a unit within a few days of your call. Call (346) 375-5416 for a written quote.
Do you match an access control repair to an older gate opener?
We do. Our technicians are trained on nine major automation brands, including Viking and DoorKing, so we do not steer you into a full opener replacement to make a keypad work. The control components are matched to your existing receiver.
Gate Parts & Welding in Jacinto City
Welding is the backbone of gate repair in Jacinto City because the environment eats ferrous metal. The ornamental iron gates common on the 1940s and 1950s homes here take a beating from channel air and floodwater, and our Gate Parts & Welding service treats structural repair as the first option, not a fallback. We replace hinges, rebuild posts, and repair rails on site whenever the damage is localized.
Hinge Replacement
Signs you need it
The gate sags on one side, scrapes the driveway, or the hinge barrels are swollen with rust and won’t take grease.
What it costs in Jacinto City
Hinge replacement in Jacinto City typically runs $120 to $260 per hinge, depending on whether the post side is reusable.
How we do it
We cut the old hinge off, grind the mounting surface clean, weld the new barrel in place, and realign the gate leaf to clear the driveway.
Post Replacement
Signs you need it
The gate post leans or rocks because water has rotted the base or the concrete footer has cracked from corrosion jacking.
What it costs in Jacinto City
Post replacement in Jacinto City typically runs $280 to $520, including cutting, setting, and welding the hinge plates to the new post.
How we do it
We excavate around the old footing, cut the post at grade, set a new steel post in fresh concrete, and rehang the gate with shims for the right reveal.
What Gate Parts & Welding Costs in Jacinto City
| Item | Typical range in Jacinto City |
|---|---|
| Hinge replacement | $120 - $260 per hinge |
| Post replacement | $280 - $520 |
| Custom welding / rust repair | $180 - $380 |
Can you weld an ornamental iron gate without replacing the whole panel?
Usually yes. We cut out the rusted section, weld in new pickets or rail stock, grind the seams flat, and coat the repaired area. The original scrollwork is preserved wherever it is structurally sound.
How long until a welded repair rusts again in Jacinto City?
Without a proper coating, new welds a few blocks from the Ship Channel can rust through in 18 to 24 months. We treat every weld with a rust-inhibiting primer and recommend a powder coat finish for anything within the corrosive zone.
Brands We Service in Jacinto City
We carry parts and service knowledge for Viking, Ghost Controls, DoorKing, and Elite automation systems, among others. That means the motor already on your post is usually repairable without a rip-and-replace. See our brands for the full list of what we support.
Pricing for Gate Repair in Jacinto City, TX
| Service | Typical range in Jacinto City |
|---|---|
| Keypad replacement or installation | $180 - $340 |
| Remote programming or replacement | $110 - $220 |
| Replacement control board (flood-damaged) | $260 - $480 |
| Hinge replacement | $120 - $260 per hinge |
| Post replacement | $280 - $520 |
| Custom welding / rust repair | $180 - $380 |
| Gate motor replacement | $550 - $1,200 |
| Full gate installation (steel, single swing) | $1,800 - $3,500 |
Two things push price up in Jacinto City: flood damage inside control housings and corrosion that has spread from a hinge into the surrounding frame. Our written quote covers the full repair, and it is handed to you before any work starts. You approve the number, and that is the number you pay.
Neighborhoods We Serve in Jacinto City
We run calls through every part of Jacinto City, from the older blocks near the Ship Channel to the residential streets further inland. Typical response time for a repair call in the area is within one day, often same day.
- Central Jacinto City near Market Street
- Blocks north of Houston Avenue
- Residential streets east of Holland
- Neighborhoods south of I-10
- West Jacinto City near the city limit
Service Area - Cities Near Jacinto City
Our dispatch runs from the Houston office, and we regularly send crews into the cities surrounding Jacinto City. See our pages for West University Place, TX, Bellaire, TX, Houston, TX, and Stafford, TX for details on each area.
Serving Jacinto City, TX - Our Local Coverage Area
We’re based in the Jacinto City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Jacinto City
Most repair calls in Jacinto City are reached within one day, and many are completed on the first visit. A live person answers the phone around the clock at (346) 375-5416, so you will not get a voicemail loop when a gate is stuck open.
For a direct repair on existing posts, usually not. A full gate installation or new post set may require a permit depending on the scope and the city’s current requirements. We can confirm the rules for your specific street before we schedule the work.
Yes. Floodwater intrusion into operator housings and control boards is one of the most common calls in this part of Harris County. We dry out the housing, test the board, and replace only what the floodwater actually destroyed. The price is written before we start.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Jacinto City Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.